- Center bracket hook type (iron butterfly, hexagon)
Hook type bracketIt is widely used in the domestic reducer where the head joint part is long.Low price and open type make it easy to use a small space
- Center bracket round type(iron butterfly, hexagon)
Round type bracketIt is used when the head of the reducer is short and the body of the reducer is 31 Ø or more. Used to connect domestic reducer, export resuspension, and dry pen head.Excellent rigidity due to general Reducer fixing bracket Can be used for dry pendant head fastening
- Cap type bracket
Cap type bracketMainly used for export, and when used for domestic use, the body of reducer must be over 31.4 pie.Patented product of Daejin Industry. It is a product with excellent fasten ability and it is possible to tighten the bolt by hand.)
- One-touch type bracket
One-touch type bracket It is mainly used for export, and the domestic conditions are the same as the cap bracket Because no tools are used at all and the time required to tighten is more than twice as fast, construction cost is reduced due to shorter construction period.The worker can easily install it with the lever without the tool, and the performance is excellent and the disassembly is free. (Patented product)
Accessory Flexible sprinkler Daejin Drop
Center bracket
The sprinkler head is connected to a reducer, which is a kind of pipe nipple, which is used to couple and fix the square bar with the reducer Types of center brackets are hook type, round type, cap type and one-touch type, which are different according to the size and convenience of the reducer.
CENTER BRACKET
| Image | Model | Description |
|---|---|---|
 |
B-CC-B | Easier Fixed Bracket Cap Type Bracket Patented Center Bracket Carbon Steel, Zinc-Plated |
 |
B-CON-B | New Open Type Bracket Patented Center Bracket Carbon Steel, Zinc-Plated |
 |
B-CS-B | Four Square Type Bracket Carbon Steel, Zinc-Plated |
| Image | Model | Description |
|---|---|---|
 |
B-COT | One Touch Type Bracket Quick time Fixed Bracket Patented Center Bracket Carbon Steel, Zinc-Plated |
 |
B-C1-B | Round Type Bracket Carbon Steel, Zinc-Plated |
 |
B-CH-B | Hook Type Bracket Economy Cost Carbon Steel, Zinc-Plated |
END BRACKET
| Image | Model | Description |
|---|---|---|
 |
B-ES-B | Short End Bracket 68mm Length Carbon Steel, Zinc-Plated |
| B-EM-B | Middle End Bracket 78mm Length Carbon Steel, Zinc-Plated |
|
| B-EL-B | Long End Bracket 105mm Length Carbon Steel, Zinc-Plated |
| Image | Model | Description |
|---|---|---|
 |
B-EOT-S | Short One touch End Bracket 68mm Length Carbon Steel, Zinc-Plated |
| B-EOT-M | Middle One touch End Bracket 78mm Length Carbon Steel, Zinc-Plated |
|
| B-EOT-L | Long One touch End Bracket 105mm Length Carbon Steel, Zinc-Plated |
REDUCER & NIPPLE
| Image | Model | Description |
|---|---|---|
 |
SQ | STOCK BAR 25″ / 650mm / 700mm / 1000mm 1300mm/ 1600mm Length Steel / Zinc-Plated |
 |
B-EHC-B | Hat Furring Channal End Bracket Carbon Steel / Zinc-Plated |
| Image | Model | Description |
|---|---|---|
 |
B-EMS-B | Metal Stud End Bracket Carbon Steel / Zinc-Plated |
 |
B-EWS-B | Wood Beam Stud Bracket Carbon Steel / Zinc-Plated |
| Image | Model | Description |
|---|---|---|
 |
NU-36 | Nut -Braid BSP or NPT Carbon Steel, Zinc-Plated |
 |
NU-33 | Nut -Unbraid BSP or NPT Carbon Steel, Zinc-Plated |
| Image | Model | Description |
|---|---|---|
 |
E-G25 E-G26 E-G28 E-G32 |
Gasket – DJ25UB Gasket – DJ25B Gasket – DJ28B Gasket – DJ32B-C EPDM material |
 |
E-I25 E-I26 E-I28 E-I32 |
Nylon Isolation Ring – DJ25UB – DJ25B – DJ28B – DJ32B-C Nylon material |
REDUCER & NIPPLE
| Image | Model | Description |
|---|---|---|
|
SQ | STOCK BAR 25″ / 650mm / 700mm / 1000mm 1300mm/ 1600mm Length Steel / Zinc-Plated |
|
B-EM-B | Hat Furring Channal End Bracket Carbon Steel / Zinc-Plated |
| Image | Model | Description |
|---|---|---|
|
B-EMS-B | Metal Stud End Bracket Carbon Steel / Zinc-Plated |
|
B-EOT-M | Wood Beam Stud Bracket Carbon Steel / Zinc-Plated |
| Image | Model | Description |
|---|---|---|
|
NU-36 | Nut -Braid BSP or NPT Carbon Steel, Zinc-Plated |
|
NU-33 | Nut -Unbraid BSP or NPT Carbon Steel, Zinc-Plated |
| Image | Model | Description |
|---|---|---|
|
E-G25 E-G26 E-G28 E-G32 |
Gasket – DJ25UB Gasket – DJ25B Gasket – DJ28B Gasket – DJ32B-C EPDM material |
|
E-I25 E-I26 E-I28 E-I32 |
Nylon Isolation Ring – DJ25UB – DJ25B – DJ28B – DJ32B-C Nylon material |
REDUCER & NIPPLE
| Image | Model | Description |
|---|---|---|
 |
R-33-P1/P2/P3/P4 R-33-N1/N2/N3/N4 |
Reducer – Unbraid 1/2″ or 3/4″ or 3/8″ or 1″ BSP or NPT Carbon Steel, Zinc-Plated 118mm Length |
 |
R-33-P1/P2/P3/P4 R-33-N1/N2/N3/N4 |
Reducer – Unbraid 1/2″ or 3/4″ or 3/8″ or 1″ BSP or NPT Carbon Steel, Zinc-Plated 118mm Length |
 |
140 R-36-P1/P2 140 R-36-N1/N2 |
Reducer – Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 140mm Length |
 |
140 R-R36-P1/P2 140 R-R36-N1/N2 |
Reducer – Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 140mm Length / Grooved |
 |
6R-R36-P1/P2 6R-R36-N1/N2 7R-R36-P1/P2 7R-R36-N1/N2 8R-R36-P1/P2 8R-R36-N1/N2 9R-R36-P1/P2 9R-R36-N1/N2 |
Reducer – Unbraid or Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 6″,7″,8″,9″ Length |
 |
R-PF1-P1 | Reducer – Unbraid 1/2″ BSP Carbon Steel, Zinc-Plated 115mm Length |
| Image | Model | Description |
|---|---|---|
 |
RE-33N-P1/P2 RE-33N-N1/N2 |
Elbow – Unbraid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 155mm Length |
 |
RE-36N-P1/P2 RE-36N-N1/N2 |
Elbow – Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 155mm Length |
 |
RE-33L-P1/P2 RE-33L-N1/N2 |
Elbow – Unbraid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 145mm Length |
 |
RE-36L-P1/P2 RE-36L-N1/N2 |
Elbow – Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 145mm Length |
 |
RE-33S-P1/P2 RE-33S-N1/N2 RE-36S-P1/P2 RE-36S-N1/N2 |
Elbow – Unbraid or Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 80mm Length |
 |
RE-33B-P1/P2 RE-33B-N1/N2 RE-36B-P1/P2 RE-36B-N1/N2 |
Short Elbow Bracket – Unbraid or Braid 1/2″ or 3/4″ BSP or NPT Carbon Steel, Zinc-Plated 42mm Length |
| Image | Model | Description |
|---|---|---|
 |
N-33-P1/P2/P3/P4 N-33-N1/N2/N3/N4 |
Nipple -Unbraid 1″x 1/2″ or 3/4″ or 3/8″ or 1″ BSP or NPT Carbon Steel, Zinc-Plated |
| N-36-P1/P2/P3/P4 N-36-N1/N2/N3/N4 |
Nipple -Braid 1″x 1/2″ or 3/4″ or 3/8″ or 1″ BSP or NPT Carbon Steel, Zinc-Plated |
|
| N-36-P5 N-36-N5 |
Nipple -Braid 1″x 1 1/4″(32mm) BSP or NPT Carbon Steel, Zinc-Plated |
- Welding nipple
Piping Welding nipple male thread is PF1 “, which is used to connect to the expansion pipe nut part.
- Connecting nipple
Piping Welding nipple male thread is PF1 “, which is used to connect to the expansion pipe nut part
- Bottom-Up Reducer (for underground parking)
Size : (70mm, 100mm, 150mm, 200mm,250mm, 300mm, 350mm, 400mm,450mm, 500mm)
